 |
| FEATURES |
|
① The axial plunger makes smooth hydraulic drive without arm pulsation.
② “PRESSURE, NEUTRAL, RELEASE” in 3 step driving is possible by simple operation of pressure control lever.
③ The structure was made for easy carrying at site.
④ The engine is easily drive by throttle lever.
⑤ No dangerous from high pressure because the pressure control valve can control up to 200tons.
⑥ Motor type is possible to supply. |
|
| COMPONENTS |
|
① Gasoline engine - Pump drive , Model CW44-P
② Hydraulic cylinder-Pressure 150 ton, Model CW44-EC (Dies will be supplied optionally)
③ Hydraulic hose - Connector jack(One touch type 1/4inch), 2 each for length 10M,
Model CW44-EH
④ Supply list : Hydraulic seal and connector jack 1set, Hose case. |
| |
| LAY-OUT |
|
 |
| |
| SPECIFICATION |
|
1.Compressor total thrust |
200 ton |
2.Operating Pressure |
700 kg/cm2 |
3.Gasoline Engine driven
Pump
(Model No.CW44-P) |
| Pump |
→Oil hydraulic pump |
→Type - 6p axial piston pump |
→Revolution -1,800 rpm |
→Pressure and Delivery - 700 kg/cm2, at 1.5
l/min |
→Control Valve - Manually operated 3 position
4way valve |
|
| Engine |
→Air cooled 4Cycle single cylinder |
→Stroke Volume - 215 cc |
→Power - 6 HP / 1,800 rpm |
→Model - HONDA, JAPAN |
|
|
4.Cylinder |
Capacity - 200 ton at 700 kg/cm2 |
(Model No.CW44-EC) |
Ram stroke- 40 mm |
5.Hydraulic Hose Assembly
(Model No.CW44-EH)
|
Hose length 10m x 2roll, Size 1/4 inch, Capacity 700kg/cm2
Connector - Screw type
|
6.Dimensions (mm) |
Gasoline Engine driven Pump |
L615 ×W440 ×H520 |
|
Cylinder |
L403×W269×H468 |
|
7.Weight |
_Gasoline Engine driven Pump |
56 kg |
(Dry condition) |
_Cylinder |
98 kg |
(Without dies) |
_Hydraulic Hose Assembly |
9.5 kg |
|
Total Weight Approx 163.5 k |
|
|
|
| NOTE : Engine will be changed without any information if necessary. |
| |